Flow & Level Meters

IsoMag MS1000 Electromagnetic Flow Meter

Combines reliable full-pipe flow measurement with high accuracy, low-cost and ease of installation. Accuracy to ±0.2% of rate from 3 to 33 ft/sec at a lower cost than flanged units. Offers eleven sizes from 1″ to 16″ Pipe Diameters with flow ranges from 2.37 to 19,934 GPM.


FM900 Open Channel Ultrasonic Flow Meter

The FLOMOTION 900 provides accurate non-contact ultrasonic open channel flow measurement. Simple programming allows selection from a list of common built-in weir and flume tables. In addition, head vs. flow data points may be input for almost any type of primary device.


BE6200 Transit Time Clamp-On Flowmeter

Economical Transit-Time flowmeter combines ease of installation with high accuracy in closed pipes. Clamp-on type ultrasonic flowmeters offer the simplest and easiest installation of any flowmeter. The BE6200 series transit-time flowmeter is no exception and installs in minutes. A pair of rugged transducers mounts easily to the outside of the pipe using standard clamping straps.


Echotel 344-345 Open Channel Ultrasonic Flowmeter

Full-featured, ultrasonic non-contact transmitters that provide continuous measurement for liquid level, volume, or open channel flow applications. These versatile transmitters utilize the latest in microprocessor based electronics along with powerful non-contact ultrasonic transducers, to provide level measurement that is not affected by changes in specific gravity, viscosity, or conductivity.


Flo-Rite Series FR Rotometers

Series FR2000/FR4000/FR4500/FR5000 is a standard precision-machined acrylic flow meter for liquids or gases, has direct reading air or water scales and is available in either English or Metric scales. The flowmeters can be configured with a control valve on the inlet or no valve at all; fittings and valve can be specified in either brass or stainless steel; O-rings can be provided with Buna-N, Viton® or other optional elastomers. FR5000 flowmeters have 1″ FNPT PVC fittings with either an inline (FR5000-I) or panel mount (FR5000-S) configuration. The panel mount version is available with an integral valve on the inlet (FR5000-V) or no valve at all.


FM1100C Ultrasonic Level Tansmitter

The FM1100C Series is designed to measure liquid level in a wide variety of applicaions.

The compact, loop-powered FM1100C provides continuous, non-contacing level measurement. Two available measuring ranges accomodate 20ft (6m) and 33ft (10m) applications.

The large LCD display, 4 status lights and 5 button keypad make setup and operation quick and easy.


FM1100 Ultrasonic Level Transmitter

The FLOMOTION 1100 with S400 or S260 sensor provides non-contacting level measurement for a wide variety of applications in both liquids and solids. The Sondar 1000 system is composed of an ultrasonic sensor and a remote mounted controller for maximum flexibility. Easy calibration and maintenance-free performance mean that you can install the 1100 Series rapidly and with confidence.


R82 Pulse Burst Radar Level Transmitter

The Model R82 is an economical, loop-powered radar transmitter bringing radar to everyday applications. Daily applications that have been considered for Ultrasonic can now use radar technology with its superior performance. The electronics are housed in a compact, single compartment cast aluminum or Lexan® housing. The R82 measures effectively even when atmospheres above the liquid are saturated with vapor. Pulse Burst technology and advanced signal processing manage common disturbances such as false echoes caused by obstructions, multi-path reflections from tank sidewalls or turbulence caused by agitators, aggressive chemicals, or aerators.


T20-T21 Float Switch

T20 and T21 units are simple, reliable float switches, designed for top mounting into tanks or vessels. T20 units utilize a single switch mechanism and float. T21 tandem units utilize two switch mechanisms and two

separate floats. T20 and T21 models are available for any type of open or closed vessel, with either threaded or flanged type mounting, and actuating depths of up to 48 inches (1219 mm).


T10 Level Float Switch

The T10 float level switch offers industrial and municipal users a low-cost solution to wide differential level applications. The moving ballast causes a flipping motion of the float to provide positive switching action even under turbulent conditions. Recommended for use in either clean or dirty liquids, it is ideal for use in sump control, wet well applications and pilot systems.


Previous