Flow & Level Meters

IsoMag MS1000 Electromagnetic Flow Meter

Combines reliable full-pipe flow measurement with high accuracy, low-cost and ease of installation. Accuracy to ±0.2% of rate from 3 to 33 ft/sec at a lower cost than flanged units. Offers eleven sizes from 1″ to 16″ Pipe Diameters with flow ranges from 2.37 to 19,934 GPM.


BE6200 Transit Time Clamp-On Flowmeter

Economical Transit-Time flowmeter combines ease of installation with high accuracy in closed pipes. Clamp-on type ultrasonic flowmeters offer the simplest and easiest installation of any flowmeter. The BE6200 series transit-time flowmeter is no exception and installs in minutes. A pair of rugged transducers mounts easily to the outside of the pipe using standard clamping straps.


FM1100C Ultrasonic Level Tansmitter

The FM1100C Series is designed to measure liquid level in a wide variety of applicaions.

The compact, loop-powered FM1100C provides continuous, non-contacing level measurement. Two available measuring ranges accomodate 20ft (6m) and 33ft (10m) applications.

The large LCD display, 4 status lights and 5 button keypad make setup and operation quick and easy.


R82 Pulse Burst Radar Level Transmitter

The Model R82 is an economical, loop-powered radar transmitter bringing radar to everyday applications. Daily applications that have been considered for Ultrasonic can now use radar technology with its superior performance. The electronics are housed in a compact, single compartment cast aluminum or Lexan® housing. The R82 measures effectively even when atmospheres above the liquid are saturated with vapor. Pulse Burst technology and advanced signal processing manage common disturbances such as false echoes caused by obstructions, multi-path reflections from tank sidewalls or turbulence caused by agitators, aggressive chemicals, or aerators.


T20-T21 Float Switch

T20 and T21 units are simple, reliable float switches, designed for top mounting into tanks or vessels. T20 units utilize a single switch mechanism and float. T21 tandem units utilize two switch mechanisms and two

separate floats. T20 and T21 models are available for any type of open or closed vessel, with either threaded or flanged type mounting, and actuating depths of up to 48 inches (1219 mm).


ThermaTel Model TA2 Thermal Mass Flowmeter

The Thermatel® Enhanced Model TA2 Thermal Mass Flow Meter provides reliable mass measurement for air and gas flow applications. The powerful, yet easy to use, electronics are contained in a compact explosion proof enclosure. The TA2 is available with both insertion probes as well as flow body design for smaller pipe sizes. The TA2 offers excellent performance at an exceptional value.


T10 Level Float Switch

The T10 float level switch offers industrial and municipal users a low-cost solution to wide differential level applications. The moving ballast causes a flipping motion of the float to provide positive switching action even under turbulent conditions. Recommended for use in either clean or dirty liquids, it is ideal for use in sump control, wet well applications and pilot systems.


Previous